BHDMN - ENAMEL ALKYD GLOSS 17038, BLACK

  • MSDS: BHDMN
  • Manufacturer: CON LUX COATINGS INC
  • Product Name: ENAMEL ALKYD GLOSS 17038, BLACK
  • National Stock Number: 8010-00-527-2050
Product Identification

Product ID:ENAMEL ALKYD GLOSS 17038, BLACK
MSDS Date:06/17/1985
FSC:8010
NIIN:00-527-2050
MSDS Number: BHDMN

Responsible Party
CON-LUX COATINGS, INC.
226 TALMAGDE ROAD
EDISON, NJ 08818-0847
US

Emergency Phone: (206) 287-4000

Info Phone: (206) 287-4000

Cage: 60189

Contractor
CON-LUX COATINGS INC
847 EDISON, NJ 08818-0847 US

Telephone: 732-287-4000

Cage: 60189

Ingredients

MINERAL SPIRITS

CAS: 64742-47-8

Fraction By Weight: 53.5%

ACGIH TLV: 500 PPM

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Effects of Overexposure:EYE/SKIN: IRRITATION MAY OCCUR WITH
OVEREXPOSURE. INHALATION: MAY
IRRITATE RESPIRATORY TRACT AND CAUSE HEADACHES OR DIZZINESS,
WHICH IS NORMAL FOR SOLVENT BASE PRODUCT S.

First Aid

First Aid:EYE/SKIN: FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER.
INHALATION: REMOVE TO FRESH AIR IF IRRITATION
PERSISTS, CONSULT A PHYSICIAN.

Fire Fighting

Flash Point Method:TCC
Flash Point:105F/40.56C
Lower Limits:1.0
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER MIST
Fire Fighting Procedures:SMOTHER FLAMES WITH ONE OF THE ABOVE
EXTINGUISHING MEDIA. WATER MAY BE USED TO COOL DOWN UNOPENED
CONTAINERS IN VICINITY.
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DONOT USE IN
AREAS WHERE SPARKS OR OPEN FLAMES ARE PRESENT.

Accidental Release

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED BREATHING OF VAPORS. VENTILATE AREA. CLEAN UP
WITHABSORBENT MATERIAL.

Handling

Handling and Storage Precautions:STORE IN BUILDINGS DESIGNED AND
PROTECTED FOR STOREAGE OF NFPA CLASS II FLAMMABLE LIQUIDS.

Exposure Controls

Respiratory Protection:IN OUTDOOR, OPEN, OR RESTRICTED VENTILATED AREAS
USE APPROVED RESPIRATOR.
Ventilation:GENERAL OR LOCAL EXHAUST
Protective Gloves:REQUIRED FOR LONG OR REPEATED CONTACT
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PREVENT PROLONGED SKIN CONTACT WITH
CONTAMINATED CLOTHING.
Supplemental Safety and Health
NK

Chemical Properties

Boiling Pt:B.P. Text:323F
Vapor Density:> AIR
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:64.1

Stability

Stability Indicator/Materials to Avoid:YES
NK
Hazardous Decomposition Products:CO,CO2

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE,
AND LOCAL REGULATIONS. DO NOT INCINERATE UNOPENED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.